Smart Sensor - Occupancy/Photo Sensor

$109.00

Touché Smart Sensors integrate dual technology occupancy/vacancy and photo (daylight) sensing into a single device. These sensors are auto-addressing and pre-configured, eliminating the need for complicated dip-switch or dial adjustments. Sensors automatically synchronize the sensing state across all connected devices, ensuring consistent operation without time-consuming individual setup. Sensors are daisy-chain connected using standard CAT5 (or higher) cables. This SmartNet connection allows sensors of different mounting configurations to be interconnected without any special considerations. This variant installs flush into either a lay-in or hard ceiling due to it's spring support design.

• These sensors are part of Touché’s® SmartNet devices. SmartNet devices and are auto-addressing and auto-configuring. Connection from device to device is made through Cat5 daisy chained patch cables. Up to eight devices can be connected to each controlling module’s smart port. Smart devices can be connected in any order and any type of smart device can be connected to the daisy chained network.
• Each smart port automatically aligns the sensing states of the sensors connected to that port so that all of the sensors act as one common sensor. No programming or configuration is required.
• Smart sensors contain no dip switches or dials for configuration. All of the calibration is automatic and all configuration is done via the software or app. This greatly reduces installation errors and simplifies mass changes to sensors in the system.
• Smart sensors can be installed as surface mounted devices for hard ceiling (drywall ceilings) applications or flush mounted in drop/lay-in ceiling applications.
• Lensing options for the PIR function comes in two simple configurations:
  360L: 360 degree ceiling mount coverage - mounting height = 20' or less
  360H: 360 degree ceiling mount coverage - mounting height > 20'.