Part Number: SMAOS-[X]-[Y]

Smart Sensors integrate dual-technology occupancy sensing and photo sensing (daylight control) into a single device. The sensors are auto-addressed and pre-configured, requiring no dip-switches or dials for sensor adjustment. For applications requiring more than one sensor for area coverage, sensors can be daisy-chained via plug-in CAT5 cables. Smart sensors take the guesswork out of setting up occupancy and daylight control. Smart sensors communicate on Touché's SmartNet making them incredibly simple to setup.

Features

• These sensors are part of Touché’s® SmartNet devices. SmartNet devices and are auto-addressing and auto-configuring. Connection from device to device is made through Cat5 daisy chained patch cables. Up to eight devices can be connected to each controlling module’s smart port. Smart devices can be connected in any order and any type of smart device can be connected to the daisy chained network.
• Each smart port automatically aligns the sensing states of the sensors connected to that port so that all of the sensors act as one common sensor. No programming or configuration is required.
• Smart sensors contain no dip switches or dials for configuration. All of the calibration is automatic and all configuration is done via the software or app. This greatly reduces installation errors and simplifies mass changes to sensors in the system.
• Smart sensors can be installed as surface mounted devices for hard ceiling (drywall ceilings) applications or flush mounted in drop/lay-in ceiling applications.
• Lensing options for the PIR function comes in two simple configurations:
  360L: 360 degree ceiling mount coverage - mounting height = 20' or less
  360H: 360 degree ceiling mount coverage - mounting height > 20'.